IBM 4910-33D Installation Guide - Page 26
Removing and installing the top cover, Attention
View all IBM 4910-33D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Removing and installing the top cover 1 2 1 March 2009 3 Figure 5. Removing and installing the top cover To open the top cover: 1. Switch OFF the power to the unit. Unplug the power cord from the system unit. 2. Attention: Establish personal grounding before touching this unit. 3. If a security screw is present, remove it using the appropriate tool (to be provided by the customer). Refer to Figure 4 on page 6 for the location of the optional security screw and to Table 6 on page 6 for more information about the security screw. 4. Press the side latches 1 . 5. Slide the top cover back 2 for approximately 15 mm (5/8 in.), then lift it up 3 . Note: Notice the SERVICE LABEL that is located on the inside of the top cover; see Figure 6 on page 13. 12 SurePOS Installation and Service