IBM 6648 User Guide - Page 87
Description, Action, Table 1. POST Error Codes continued
UPC - 087944583387
View all IBM 6648 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Table 1. POST Error Codes (continued) Code Description Action 168 Alert on LAN is not working 1. Go to "Chapter 4. Using the correctly. Configuration/Setup Utility program" on page 29 and follow the instructions to verify that Alert on LAN is enabled. 2. If Alert on LAN is enabled and the error persists, have the computer serviced. 175 System board error Have the computer serviced. 176 System cover has been removed. Type in the administrator password. If problem persists, have the computer serviced. 177 An inventory violation occurred, Type in the administrator password. such as a hardware component was If the problem persists, have the removed. This error message is part computer serviced. of the AssetCare and Asset ID features of the computer. 183 Administrator password required. Type the administrator password. 184 Asset control antenna not detected. Have the computer serviced. 186 System board or hardware security Have the computer serviced. error 187 Administrator password and Go to ""Starting the startup sequence has been cleared. Configuration/Setup Utility program" on page 67 and follow the instructions to set an administrator password and the startup sequence. 190 The computer chassis-intrusion No action is required. detector was cleared. This is an informational message. 20x Memory error Go to "IBM Enhanced Diagnostics program" on page 92 and follow the instructions to run diagnostics. 229 Level 2 cache error Have the computer serviced. 301 or 303 Keyboard error 1. Make sure the keyboard is properly connected. 2. If the keyboard is properly connected, have the computer serviced. Chapter 6. Troubleshooting 73