IBM 865511Y Hardware Maintenance Manual - Page 158
PCI/ISA configuration
UPC - 087944509769
View all IBM 865511Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
POST Error Code 14XX Not listed above. Check printer before replacing system board. 15XX 1692 Boot sequence error. 16XX 1762 Hard disk drive configuration error. 178X Hard disk drive test failed 180X, 188X PCI configuration or resource error. 1962 Boot sequence error. 209X 20XX Not listed above 21XX 2401, 2402 If screen colors change. 2401, 2402 If screen colors are OK. 2409 2410 FRU/Action 1. Printer 2. System Board 1. SDLC Adapter 1. Run FDISK to ensure at least one active partition is set active. 1. 36/38 Workstation Adapter 1. Run Configuration 1. See "Power supply" on page 59. 2. Hard Disk Drive 3. System Board 4. Hard Disk Cable 5. Power Supply 1. Run Setup and verify PCI/ISA configuration settings. 2. If necessary, set ISA adapters to "Not available" to allow PCI adapters to properly configure. 3. Remove any suspect ISA adapters. 4. Rerun diagnostics. 5. PCI Adapter 1. Possible hard disk drive problem 1. Diskette Drive 2. Diskette Cable 3. 16-bit AT Fast SCSI Adapter 1. BSC Adapter 1. SCSI Device 2. 16-bit AT Fast SCSI Adapter 3. Alternate BSC Adapter 1. Display 1. System Board 2. Display 1. Display 1. System Board 2. Display 150 Netfinity Server HMM