IBM 865511Y Hardware Maintenance Manual - Page 23

Other Programs on the IBM Enhanced, Diagnostics CD and Diskette, Other Diagnostic Programs on

Page 23 highlights

5. Select Startup Sequence from the Start Options menu. 6. Note the device selected as the First Startup Device. Later, you must restore this setting. 7. Select CD ROM as the First Startup Device. 8. Press Esc two times to return to the Configuration/Setup Utility menu. 9. Select Save Settings and follow the prompts. 10. Place the IBM Enhanced Diagnostics CD in the CD-ROM drive. 11. Select Exit Setup and follow the prompts. The diagnostics will load. Follow the instructions on the screen to run the diagnostics. Important Information When you finish running diagnostics and utilities, remove the CD from the CD-ROM drive and turn the computer off. You must restore the First Startup Device back to the original setting. Use steps 2 on page 14 through 9 of the above procedure to do this. To start the IBM Enhanced Diagnostics using the diagnostic diskette, do the following: 1. Turn off your computer and any attached devices. 2. Insert the IBM Enhanced Diagnostics diskette into diskette drive A. 3. Turn on all attached devices; then turn your computer on. 4. Follow the instructions on the screen. Other Programs on the IBM Enhanced Diagnostics CD and Diskette: The IBM Enhanced Diagnostics CD and diskette also contain utility programs designed to provide information about your computer hardware and the way it is configured. This information might be useful in helping to isolate problems related to the operating system and device drivers. Other Diagnostic Programs on the Ready-to-Configure Utility Program CD: The Ready-to-Configure Utility Program CD that comes with your computer also contains diagnostic programs designed specifically for certain operating environments (Windows 95 and Windows NT). Because these versions work with the operating system, they not only test the hardware, but also analyze certain software components of your computer. They are especially useful in isolating problems related to the operating system and device drivers. Netfinity 8655 - Type 8655 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248

5.
Select
Startup Sequence
from the Start Options
menu.
6.
Note the device selected as the First Startup Device.
Later, you must restore this setting.
7.
Select
CD ROM
as the First Startup Device.
8.
Press
Esc
two times to return to the
Configuration/Setup Utility menu.
9.
Select
Save Settings
and follow the prompts.
10.
Place the IBM Enhanced Diagnostics CD in the
CD-ROM drive.
11.
Select
Exit Setup
and follow the prompts.
The
diagnostics will load.
Follow the instructions on the
screen to run the diagnostics.
Important Information
When you finish running diagnostics and utilities,
remove the CD from the CD-ROM drive and turn the
computer off.
You must restore the First Startup
Device back to the original setting.
Use steps 2 on
page
14 through 9 of the above procedure to do this.
To start the IBM Enhanced Diagnostics using the
diagnostic diskette, do the following:
1.
Turn off your computer and any attached devices.
2.
Insert the IBM Enhanced Diagnostics diskette into
diskette drive A.
3.
Turn on all attached devices; then turn your computer
on.
4.
Follow the instructions on the screen.
Other Programs on the IBM Enhanced
Diagnostics CD and Diskette:
The IBM
Enhanced Diagnostics CD and diskette also contain utility
programs designed to provide information about your
computer hardware and the way it is configured.
This
information might be useful in helping to isolate problems
related to the operating system and device drivers.
Other Diagnostic Programs on the
Ready-to-Configure Utility Program CD
:
The
Ready-to-Configure Utility Program CD
that comes with
your computer also contains diagnostic programs designed
specifically for certain operating environments (Windows
95 and Windows NT).
Because these versions work with
the operating system, they not only test the hardware, but
also analyze certain software components of your
computer.
They are especially useful in isolating problems
related to the operating system and device drivers.
Netfinity 8655 - Type 8655
15