IBM 865511Y Hardware Maintenance Manual - Page 75
Controls and status indicators, Power Switch
![]() |
UPC - 087944509769
View all IBM 865511Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Controls and status indicators Important The power line and power control behavior of the Netfinity 3500 M10 is different from some earlier server models. Note the following: When the power cord is first plugged in, the server might appear to power on for a few seconds, then power off. This is a normal sequence to enable the server to self-initialize. The power switch will normally operate with a single touch. However, in some circumstances the server may not immediately power off. In this case, hold the power switch down for approximately 5 seconds. The server will then turn off. Do not operate your server with the cover off. Proper cooling is required for the reliable performance of internal components. Power Switch Power-On Light Hard-Disk Drive Light LAN Activity Light Diskette Eject Button Diskette Drive Light The following describes the operating controls and status indicators located on the front of your server. Power Switch: Press this switch to turn your server on or off. Do not turn off your server if the in-use light for the hard disk drive or diskette drive is on. Netfinity 8655 - Type 8655 67 Socket 7
![](/manual_guide/products/ibm-865511y-hardware-maintenance-manual-da503d5/75.png)