IBM 865511Y Hardware Maintenance Manual - Page 176
FRU/Action, System ECC error
![]() |
UPC - 087944509769
View all IBM 865511Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Diagnostic Error Code 001-039-XXX System DMI data structure error 001-040-XXX System IRQ failure 001-041-XXX System DMA failure 001-195-XXX System Test aborted by user 001-196-XXX System test halt, error threshold exceeded 001-197-XXX System test warning 001-198-XXX System test aborted 001-199-XXX System test failed, cause unknown 001-250-XXX System ECC error 001-254-XXX 001-255-XXX 001-256-XXX 001-257-XXX System DMA error 001-260-XXX 001-264-XXX System IRQ error 001-268-XXX System IRQ1 failure FRU/Action 1. Flash the system 2. System board 1. Power-off/on system and re-test 2. System board 1. Power-off/on system and re-test 2. System board 1. Information 2. Re-start the test, if need to 1. Depress F3 to review the log file. 2. Re-start the test to reset the log file. 1. Make sure component that is called out is enabled and/or connected 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is enabled and/or connected 2. Flash the system and re-test 3. Go to "Undetermined problem" on page 189 1. Go to "Undetermined problem" on page 189. 2. Flash the system and re-test 3. Replace component under function test. 1. System board 1. System board 1. System board 1. device on IRQ1 2. System board 168 Netfinity Server HMM
![](/manual_guide/products/ibm-865511y-hardware-maintenance-manual-da503d5/176.png)