IBM 865511Y Hardware Maintenance Manual - Page 74
Start Here, Important Information
![]() |
UPC - 087944509769
View all IBM 865511Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Refer to the Start Here booklet for instructions on cabling the server. Important Information: For operation of the system within FCC Class A limits, Class 5 Ethernet cabling must be used. If there is a label covering the power connector, remove it. Connect the power cords to the server and other devices first, then plug the cords into properly grounded electrical outlets. When the power cord is first plugged in, the server powers on for a few seconds, then powers off. This is normal operation. In some circumstances, the server might not power off immediately when the power switch is pressed. In this case, hold the power switch down until the power turns off. 66 Netfinity Server HMM
![](/manual_guide/products/ibm-865511y-hardware-maintenance-manual-da503d5/74.png)
Refer to the
Start Here
booklet for instructions on cabling
the server.
Important Information:
±
For operation of the system within FCC Class A
limits, Class 5 Ethernet cabling must be used.
±
If there is a label covering the power connector,
remove it.
Connect the power cords to the server
and other devices first, then plug the cords into
properly grounded electrical outlets.
±
When the power cord is first plugged in, the server
powers on for a few seconds, then powers off.
This
is normal operation.
±
In some circumstances, the server might not power
off immediately when the power switch is pressed.
In
this case, hold the power switch down until the power
turns off.
66
Netfinity Server HMM