IBM 865511Y Hardware Maintenance Manual - Page 56

Setting automatic power-on features, Startup Sequence, Enabled, Disabled, Primary, Automatic

Get IBM 865511Y - Netfinity 3500 M10 PDF manuals and user guides
UPC - 087944509769
View all IBM 865511Y manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

IDE Drives: This selection enables you to specify if the CD-ROM drives should be enabled or disabled when power-management options take affect. To set power-management features: 1. Start the Configuration/Setup Utility program (see "Starting and using the program" on page 20). 2. Select Power Management from the Configuration/Setup Utility program menu. Important The power management default setting is disable. Changing this setting may cause system problems and BIOS problems. 3. Select APM. 4. Set APM BIOS Mode to Enabled. 5. Select values for power management (time to low power, system power, processor speed, display, and time to display off), as necessary. 6. Set IDE Drives to Enabled or Disabled. Note SCSI drives are not affected by APM. 7. Press Esc twice to return to the Configuration/Setup Utility program menu. 8. Before you exit from the program, select Save Settings from the Configuration/Setup Utility program menu. 9. To exit from the Configuration/Setup Utility program, press Esc and follow the instructions on the screen. Setting automatic power-on features: The Automatic Power-On features within the Power Management menu allow you to enable and disable features that automatically turn your server on. You must also select the startup sequence you want to use for the type of power-on event selected. If you select Automatic, make sure Automatic Power On Startup Sequence in the Startup Sequence menu is set to enabled. Otherwise, the system will use the Primary startup sequence. To set Automatic Power-On features: 1. Start the Configuration/Setup Utility program (see "Starting and using the program" on page 20). 2. Select Power Management from the Configuration/Setup Utility program menu. 3. Select Automatic Power On. 4. Select the menu item for the feature you want to set. Use Left Arrow (←) or Right Arrow (→) to select either Enabled or Disabled. 5. Select Startup Sequence for the feature. Use Left Arrow (←) or Right Arrow (→) to select either Primary or Automatic. 48 Netfinity Server HMM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
±
IDE Drives
: This selection enables you to specify if
the CD-ROM drives should be enabled or disabled
when power-management options take affect.
To set power-management features:
1.
Start the Configuration/Setup Utility program (see
“Starting and using the program” on page
20).
2.
Select
Power Management
from the
Configuration/Setup Utility program menu.
Important
The power management default setting is
disable.
Changing this setting may cause system
problems and BIOS problems.
3.
Select
APM
.
4.
Set
APM BIOS Mode
to
Enabled
.
5.
Select values for power management (time to low
power, system power, processor speed, display, and
time to display off), as necessary.
6.
Set
IDE Drives
to
Enabled
or
Disabled
.
Note
SCSI drives are not affected by APM.
7.
Press
Esc
twice to return to the Configuration/Setup
Utility program menu.
8.
Before you exit from the program, select
Save
Settings
from the Configuration/Setup Utility program
menu.
9.
To exit from the Configuration/Setup Utility program,
press
Esc
and follow the instructions on the screen.
Setting automatic power-on features:
The
Automatic Power-On features within the Power
Management menu allow you to enable and disable
features that automatically turn your server on.
You must
also select the startup sequence you want to use for the
type of power-on event selected.
If you select
Automatic
,
make sure
Automatic Power On Startup Sequence
in
the
Startup Sequence
menu is set to enabled.
Otherwise,
the system will use the
Primary
startup sequence.
To set
Automatic Power-On features:
1.
Start the Configuration/Setup Utility program (see
“Starting and using the program” on page
20).
2.
Select
Power Management
from the
Configuration/Setup Utility program menu.
3.
Select
Automatic Power On
.
4.
Select the menu item for the feature you want to set.
Use Left Arrow (
←
) or Right Arrow (
→
) to select
either
Enabled
or
Disabled
.
5.
Select Startup Sequence for the feature.
Use Left
Arrow (
←
) or Right Arrow (
→
) to select either
Primary
or
Automatic
.
48
Netfinity Server HMM