IBM 866631Y Hardware Maintenance Manual - Page 84
Ethernet port connector, Advanced System Management ports, Cabling the server
![]() |
UPC - 087944569336
View all IBM 866631Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Ethernet port connector The following table shows the pin-number assignments for the RJ-45 connector. These assignments apply to both 10BASE-T and 100BASE-TX devices. 1 6 Table 17. Ethernet RJ-45 connector pin-number assignments. Pin Signal Pin Signal 1 Transmit data+ 5 Not connected 2 Transmit data- 6 Receive data - 3 Receive data+ 7 Not connected 4 Not connected 8 Not connected Advanced System Management ports The server has three communication ports dedicated to the Netfinity Advanced System Management Processor. One port uses a standard D-shell serial-port connector, connector C. The other two ports, which are used for the Advanced System Management Interconnect function, use a dual RJ-45 connector. You can attach a dedicated modem to the D-shell system-management connector on the rear of the server to communicate with the integrated Netfinity Advanced System Management Processor. The Advanced System Management Interconnect function uses the RJ-45 system-management connectors. This function enables you to connect the Advanced System Management Processors of several rack-mounted servers so that they can communicate with each other in half-duplex mode. Cabling the server Refer to the following illustration for the location of input and output connectors and for an example of proper cable routing. 74 Hardware Maintenance Manual: Netfinity 7100 - Type 8666
![](/manual_guide/products/ibm-866631y-hardware-maintenance-manual-80ad7e3/84.png)