IBM IC35L040AVVN07-0 Hard Drive Specifications - Page 120
Option Bit. Indicates that the Option Bit of the Sector Count Register should be specified.
UPC - 683728124212
View all IBM IC35L040AVVN07-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
L LBA mode. Indicates the addressing mode. Zero specifies CHS mode and one specifies LBA addressing mode. R Retry. Original meaning is obsoleted, there is no difference between 0 and 1. (Use of 0 is recommended for future compatibility.). B Option Bit. Indicates that the Option Bit of the Sector Count Register should be specified. (This bit is used by Set Max Address command) V Valid. Indicates that the bit is part of an output parameter and should be specified. x Indicates that the hex character is not used. - Indicates that the bit is not used. Input Registers 0 Indicates that the bit is always set to zero. 1 Indicates that the bit is always set to one. H Head number. Indicates that the head number part of the Device/Head Register is an input parameter and will be set by the device. V Valid. Indicates that the bit is part of an input parameter and will be set to zero or one by the device. - Indicates that the bit is not part of an input parameter. The command descriptions show the contents of the Status and Error Registers after the device has completed processing the command and has interrupted the host. Deskstar 120GXP hard disk drive specifications 106