IBM IC35L040AVVN07-0 Hard Drive Specifications - Page 162
Identifier 1- Master, 0- User
UPC - 683728124212
View all IBM IC35L040AVVN07-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Word 00 01-16 17 18-255 Description Control Word bit 0 : Identifier (1- Master, 0- User) bit 1-7 : Reserved bit 8 : Security level (1- Maximum, 0- High) bit 9-15 : Reserved Password (32 bytes) Master Password Revision Code Valid if Word 0 bit 0 = 1 Reserved Figure 126. Security Set Password Information Identifier Security Level Password Zero indicates that device regards Password as User Password. One indicates that device regards Password as Master Password. Zero indicates High level, one indicates Maximum level. If the host sets High level and the password is forgotten, the Master Password can be used to unlock the device. If the host sets Maximum level and the user password is forgotten, only a Security Erase Prepare/Security Unit command can unlock the device and all data will be lost. All 32 bytes of the text of the password are always significant. Master Password Revision Code The revision code field is returned in the IDENTIFY DEVICE word 92. The valid revision codes are 0001h through FFFEh. The device accepts the command with a value of 0000h or FFFFh in this field but does not change the Master Password Revision code. The setting of the Identifier and Security level bits interacts as follows: Identifier=User / Security level = High The password supplied with the command will be saved as the new user password. The security mode feature (lock function) will be enabled from the next power on. The drive may then be unlocked by either the user password or the previously set master password. Identifier=Master / Security level = High This combination will set a master password but will NOT enable the security mode feature (lock function). Identifier=User / Security level = Maximum The password supplied with the command will be saved as the new user password. The security mode feature (lock function) will be enabled from the next power on. The drive may then be unlocked by only the user password. The master password previously set is still stored in the drive but may NOT be used to unlock the device. Identifier=Master / Security level = Maximum This combination will set a master password but will NOT enable the security mode feature (lock function). Deskstar 120GXP hard disk drive specifications 148