IC Realtime DVR-FLEX8E Product Manual - Page 142
IC Realtime DVR-FLEX8E Manual
View all IC Realtime DVR-FLEX8E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Figure 7-39 Figure 7-40 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable motion detection function. Please select a channel from the dropdown list. Period Anti-dither Motion detection function becomes activated in the specified periods. See Figure 7-38. There are six periods in one day. Please draw a circle to enable corresponding period. Click OK button, system goes back to motion detection interface, please click save button to exit. System only memorizes one event during the anti-dither period. The value ranges from 5s to 600s. Sensitivity Region There are six levels. The sixth level has the highest sensitivity. There are six levels. The sixth level has the highest sensitivity. Region: If you select motion detection type, you can click this button to set motion detection zone. The interface is shown as in Figure 7-39. There are PAL 22X18/NTSC 22X15 zones. Right click mouse you can go to full-screen display mode. Do remember 132