IC Realtime DVR-FLEX8E Product Manual - Page 64
Auto Scan Setup, 9.8 Activate Auto Scan
View all IC Realtime DVR-FLEX8E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4.9.7 Auto Scan Setup In Figure 4-38, click border button. The interface is shown as in Figure 4-43. X347H X348H Please go to Figure 4-35, use direction arrows to select camera left limit X349H X349H Then please go to Figure 4-43 and click left limit button X350H X Repeat the above procedures to set right limit. Figure 4-51 4.9.8 Activate Auto Scan In Figure 4-47, click "Auto Scan" button, the system begins auto scan. Correspondingly, the auto scan button becomes Stop button. Click stop button to terminate scan operation. 4.11 Flip In Figure 4-47, click page switch button, you can see an interface is shown as below. See Figure 4-52. Here you can set auxiliary function. The aux value has relation ship with the Aux button of the decoder. Click page switch button again, system goes back to Figure 4-43. Figure 4-52 54