IC Realtime DVR-FLEX8E Product Manual - Page 164
IC Realtime DVR-FLEX8E Manual
![]() |
View all IC Realtime DVR-FLEX8E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Figure 7-80 Please refer to the following sheet for detailed information. Parameter Protocol Baud Rate Data Bit Stop bit Parity Function Select the corresponding dome protocol. Default setup is console. Select the baud rate. Default setup is 115200. The value ranges from 5 to 8. Default setup is 8. There are two options: 1/2. Default setup is 1. There are five options: none/odd/even/space/mark. Default setup is none. 7.8.5.9 PTZ The PTZ interface is shown as in Figure 7-81. Before setup, please check the following connections are right: z PTZ and decoder connection is right. Decoder address setup is right. z Decoder A (B) line connects with DVR A (B) line. Click Save button after you complete setup, you can go back to the monitor interface to control speed dome. Figure 7-81 154
![](/manual_guide/products/ic-realtime-dvrflex8e-product-manual-bd7cd5b/164.png)