IC Realtime DVR-FLEX8E Product Manual - Page 154
System
View all IC Realtime DVR-FLEX8E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Start all/ stop all Check the corresponding All button, you can enable or disable all channels record. 7.8.5 System 7.8.5.1 General The general interface includes General, date/time and holiday setup. 7.8.5.1.1 General The general interface is shown as in Figure 7-63. Figure 7-63 Please refer to the following sheet for detailed information. Parameter Function Device ID It is to set device name. Device No. It is device channel number. Language You can select the language from the dropdown list. Please note the device needs to reboot to get the modification activated. Video Standard This is to display video standard such as PAL. HDD full Pack duration Here is for you to select working mode when hard disk is full. There are two options: stop recording or rewrite. If current working HDD is overwritten or the current HDD is full while the next HDD is no empty, then system stops recording, If the current HDD is full and then next HDD is not empty, then system overwrites the previous files. Here is for you to specify record duration. The value ranges from 1 to 120 minutes. Default value is 60 minutes. 7.8.5.1.2 Date and time The date and time interface is shown as in Figure 7-64 144