IC Realtime DVR-FLEX8E Product Manual - Page 98
Abnormality, 5.3 Alarm Output
View all IC Realtime DVR-FLEX8E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Figure 5-51 5.5.2 Abnormality Abnormality interface is shown as in Figure 5-52. z Event type: There are several options for you such as disk error, no disk, disconnection, IP conflict, MAC conflict and etc. z Alarm output: Please select alarm activation output port (multiple choices). z Latch: Here you can set corresponding delaying time. The value ranges from 10s-300s. System automatically delays specified seconds in turning off alarm and activated output after external alarm cancelled. z Show message: system can pop up the message in the local screen to alert you when alarm occurs. z Alarm upload: System can upload the alarm signal to the network (including alarm centre) if you enabled current function. z Send email: System can send out email to alert you when alarm occurs. z Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm occurs. 5.5.3 Alarm Output Figure 5-52 88