IC Realtime DVR-FLEX8E Product Manual - Page 165
Text Overlay
View all IC Realtime DVR-FLEX8E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Please refer to the following sheet for detailed information. Parameter Channel Protocol Function Select speed dome connected channel. Select the corresponding dome protocol such as PELCOD.. Address Baud Rate Set corresponding dome address. Default value is 1. Please note your setup here shall comply with your dome address; otherwise you can not control the speed dome. Select the dome baud rate. Default setup is 9600. Data Bit Stop bit Parity Default setup is 8. Please set according to the speed dome dial switch setup. Default setup is 1. Please set according to the speed dome dial switch setup. Default setup is none. Please set according to the speed dome dial switch setup. 7.8.6 Advanced 7.8.6.1 Text Overlay The card overlay function is for financial areas. It includes Sniffer, information analysis and title overlay function. The Sniffer mode includes COM and network. 7.8.6.1.1 COM Type The COM interface is shown as below. See Figure 7-82. z Protocol: Please select from the dropdown list. z Setting: Click COM setting button, the interface is shown as in RS232 interface. Please refer to Chapter 7.8.5.8 RS232. z Overlay channel: Please select the channel you want to overlay the card number. z Overlay mode: There are two options: preview and encode. Preview means overlay the card number in the local monitor video. Encode means overlay the card number in the record file. z Overlay Position: Here you can select the proper overlay position from the dropdown list. Figure 7-82 7.8.6.1.2 Network Type The network type interface is shown as below. See Figure 7-83. Here we take the ATM/POS protocol to continue. There are two types: with or without the protocol according to client's requirements. With the protocol 155