Icom IC-2820H Instruction Manual - Page 126
SCAN items
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
14 MENU SCREEN OPERATION ■ SCAN items D Scan timer Selects scan resume timer from T-15 (default), T-10, T-5 and P-2. • T-15/10/5 : Scan pauses for 15/10/5 sec., then resumes. • P-2 : Pause on a signal until signal disappears, then resumes 2 sec. after the signal disap- pears. D Program skip scan Sets programmed skip scan setting from ON (default) and OFF for full scan or programmed scan operation. D Bank link scan Sets the memory bank link function ON and OFF (default). The link function provides continuous bank scan, scanning all contents in the selected banks during bank scan. • Bank link setting q Enter MENU screen via function guide. ➥ Push [F• ] to display function guide. ➥ Push [MENU](V/MHz•SCAN) (Right band's) to enter MENU screen. w Rotate [DIAL] to select "SCAN," then push [MAIN•BAND]. e Rotate [DIAL] to select "BANK LINK," then push [MAIN•BAND] to enter bank setting. r Rotate [DIAL] to select the desired bank initial, then push [MAIN•BAND]. t Rotate [DIAL] to turn ON (default) and OFF the link setting, then push [MAIN•BAND]. y Rotate [DIAL] to select next bank and repeat steps r to t, or push [BACK](V/MHz•SCAN) (Right band's) three times to exit scan set mode. 105