Icom IC-2820H Instruction Manual - Page 79
DV voice memory
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
5 DV MODE OPERATION (Optional UT-123 is required) D Transmission condition setting q Push [F• ] to display the function guide. w Push [MENU](V/MHz•SCAN) (Right band's) to display the "MENU" screen. eRotate [DIAL] to select "DV SET MODE," then push [MAIN•BAND]. rRotate [DIAL] to select "DV DATA TX," then push [MAIN•BAND]. t Rotate [DIAL] to select the desired transmission condition. PTT : The entered text data in the Terminal Window (buffer screen) is transmitted when [PTT] is pushed. (default) AUTO : The entered text data in the Terminal Window (buffer screen) is automatically transmitted when text is entered. y Push [BACK](V/MHz•SCAN) (Right band's) three times to exit from DV set mode screen. ■ DV voice memory 1 The IC-2820H has a DV voice memory that records aa total of 2 30 sec. (approx.) of received audio. The DV voice memory is divided into 2 tracks, 15 seconds 3 each in a track, as the default setting. 4 D Recording received audio 5 qSelect DV mode in main band, and deactivate the priority 6 watch (p. 81) and weather alert function (p. 123) if activated. wWhile receiving a DV signal, push [F• ] twice to display 7 the function guide 2. 8 ePush [REC](M/CALL•MW) (Right band's) to display the REC track screen. 9 r Rotate [DIAL] to select the desired track. 10 • Bar meter is displayed for the track that has been recorded. 11 12 13 14 t Push [REC](M/CALL•MW) (Right band's) to start recording. 15 • Track counter (bar meter) is displayed during record. • The recording is paused automatically when the DV signal is in- 16 terrupted or when the DV audio signal cannot be received cor- 17 rectly. Re-starts the recording when the DV audio signal is received correctly. 18 y Push [■](TONE•DTMF) to stop recording. • The recording stops automatically when the track becomes full. 19 58