Icom IC-2820H Instruction Manual - Page 44
V/V, U/U simultaneous receive
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
3 BASIC OPERATION ■ V/V, U/U simultaneous receive (Para-watch) The IC-2820H can simultaneously receive two signals on the same band, such as 144 MHz band, using the para-watch function. To activate the para-watch function from the HM-133, enter the desired frequencies for each the left and right bands using the direct frequency input capability via the keypad; or perform the following operation. Can be switched between VHF and UHF [Example] z Push [BAND] to select the desired band (left or ENT right) as the main band. C • Push [VFO/LOCK] to select VFO mode, if neces- sary. x Push [ENT C(T-OFF)] to activate the keypad for digit input. c Push 6 keys to input a frequency. • When a digit is mistakenly input, push [ENT C(T- OFF)] to clear the input, then repeat input from the 1st digit. v Push [VFO/LOCK] to change main band, then repeat the steps z to c for the other band. qPush and hold either the left or right band's [MAIN•BAND] for 1 sec. to select the frequency band selecting condition. wRotate the same band's [DIAL] to select the desired frequency band. e Push the [MAIN•BAND] to return to frequency indication. r Set the desired frequency. t Repeat the steps q to r for the other band (left or right). 23 NOTE: • Memory channels are common for the left and right band. • Transmitting during the para-watch operation is possible. However, the sub band's reception is deactivated during transmit as shown in the example at left. • DV mode receiving is available only one band.