Icom IC-2820H Instruction Manual - Page 20

Programming memory channels

Page 20 highlights

QUICK REFERENCE GUIDE ■ Programming memory channels The IC-2820H has a total of 522 memory channels (including 20 scan edge and 2 call channels) for storing often used operating frequency, repeater settings, etc. Any memory channel can be recalled on either the left or right band. 1. Setting a frequency In VFO mode, set the desired operating frequency with repeater, tone and tuning steps, etc. ➥ Push the desired band's [V/MHz•SCAN] to select VFO. ➥ Rotate the same band's [DIAL] to set the desired fre- quency. • Set other data, such as repeater tone, duplex information, tuning step), if desired. 3. Writing a memory channel Push and hold [S.MW](M/CALL•MW) (Left band's) for 1 sec. to program. • 3 beeps sound • Return to VFO mode automatically after programming. • Memory channel number automatically increases when continuing to push [M/CALL•MW] after programming. 2. Selecting a memory channel Push and hold the same band's [M/CALL•MW] for 1 sec., then rotate the same band's [DIAL] to select the desired memory channel. • "X" indicator and memory channel number blink. Push [M/CALL•MW] for 1 sec. XIII

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164

XIII
QUICK REFERENCE GUIDE
Programming memory channels
The IC-2820H has a total of 522 memory channels
(including
20 scan edge and 2 call channels)
for storing often used operat-
ing frequency, repeater settings, etc.
Any memory channel can be recalled on either the left or right
band.
1. Setting a frequency
In VFO mode, set the desired operating frequency with re-
peater, tone and tuning steps, etc.
Push the desired band’s
[V/MHz•SCAN]
to select VFO.
Rotate the same band’s
[DIAL]
to set the desired fre-
quency.
• Set other data, such as repeater tone, duplex information, tuning
step), if desired.
2. Selecting a memory channel
Push and hold the same band’s
[M/CALL•MW]
for 1 sec.,
then rotate the same band’s
[DIAL]
to select the desired
memory channel.
•“
X
” indicator and memory channel number blink.
3. Writing a memory channel
Push and hold
[S.MW](M/CALL•MW)
(Left band’s)
for 1 sec.
to program.
• 3 beeps sound
• Return to VFO mode automatically after programming.
• Memory channel number automatically increases when continuing
to push
[M/CALL•MW]
after programming.
Push [M/CALL•MW] for 1 sec.