Icom IC-F5061D Operating Guide - Page 11
■ Receiving a message, Receiving a status message, Receiving an SDM
View all Icom IC-F5061D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
BIIS 1200 OPERATION 2 ■ Receiving a message 1 D Receiving a status message D Receiving an SDM (Short Data Message) 2 q When a status message is received: q When an SDM is received: 3 • Beeps sound. • Beeps sound. • The status message and the calling station ID (or text) is dis- • " " appears. 4 played when the display mode is 2 lines, as shown below. • When the display mode is 1 line, the status message and the • The SDM and the calling station ID (or text) may be displayed when the display mode is 2 lines, as shown below. 5 calling station ID (or text) may be alternately displayed depending on the setting. • The SDM and the calling station ID (or text) is alternately dis- 6 played when the display mode is 1 line, depending on the pre- setting. 7 RX Status 01 Appears 8 1234 SDM 8 9 w P ush [Moni (Audi)] to return to the standby mode. 1234 10 NOTE: When the display mode is 1 line Only the calling station ID (or text) is displayed (no message 11 NOTE: When the received SDM includes more than 12 characters, the message automatically scrolls when the 12 is alternately displayed) when the scroll timer is set to 'OFF.' In this case, push [Status Up]/[Status Down] to manually display the status message. automatic scroll function is activated. 13 • P ush [Status Up]/[Status Down] to manually scroll the mes- sage. 14 Appears 15 SDM 12345678 16 1234 w P ush [Moni (Audi)] to return to the standby mode. 8