Icom IC-F5061D Operating Guide - Page 39
Transmitting a Revive Call, REVIVE, STATION
View all Icom IC-F5061D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
IDAS OPERATION 5 D Transmitting a Revive Call 1 A Revive call will send a signal that will revive a stunned transceiver. t P ush [PTT] to transmit the Revive call to the selected station. • "REV TX" is displayed. 2 y Release [PTT]. 3 q P ush [Digital Button] to enter the application selection mode. • "VOICE" appears. • "REV ACK" is displayed if an acknowledgement is received from the targeted station. 4 • To change the call type, hold down [Digital Button] for 1 second in the standby mode. After changing, the transceiver automatically • "REV FAIL" is displayed if no acknowledgement is received from the targeted station. 5 enters the application selection mode. u A fter a specified time period has passed, your transceiver 6 w P ush [CH Up] or [CH Down] to select "REVIVE." will return to the standby mode. e P ush [Digital Button] again to enter the Individual ID se- 7 lection mode. 8 • A preprogrammed ID name is displayed. • When an ID name is not programmed, an ID code is displayed. 9 • The primarily ID can be preset to display first. This function is usable in transceivers whose revision number is 10 2.9 or later. Ask your dealer for details. 11 r P ush [CH Up] or [CH Down] to select the desired ID name or ID code. 12 • Depending on the presetting, you may be able to directly input the ID. (The optional HM-152T is required.) See page 43 for de- 13 tails. 14 REVIVE 15 STATION 1 16 The individual ID name is displayed. 36