Icom IC-F5061D Operating Guide - Page 40

5 IDAS OPERATION D Transmitting a Remote Monitor Call A remote monitor call will send a signal that requires the targeted station to transmit its microphone audio. q P ush [Digital Button] to enter the application selection mode. • "VOICE" appears. • To change the call type, hold down [Digital Button] for 1 second in the standby mode. After changing, the transceiver automatically enters the application selection mode. w P ush [CH Up] or [CH Down] to select "REM MON." e P ush [Digital Button] again to enter the Individual ID se- lection mode. • A preprogrammed ID name is displayed. • When an ID name is not programmed, an ID code is displayed. • The primarily ID can be preset to display first. This function is usable in transceivers whose revision number is 2.9 or later. Ask your dealer for details. r P ush [CH Up] or [CH Down] to select the desired ID name or ID code. • Depending on the presetting, you may be able to directly input the ID. (The optional HM-152T is required.) See page 43 for details. REM MON STATION 1 The individual ID name is displayed. t H old down [PTT] to transmit the Remote monitor call to the selected station. • "REM TX" is displayed. y Release [PTT]. • "REM ACK" is displayed if an acknowledgement is received from the targeted station. • "REM FAIL" is displayed if no acknowledgement is received from the targeted station. u A fter a specified time period has passed, your transceiver will return to the standby mode. 37