Icom IC-F5061D Operating Guide - Page 35
Transmitting a Voice Call, INDIVIDUAL, VOICE
![]() |
View all Icom IC-F5061D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
IDAS OPERATION 5 ■ Transmitting a call 1 IDAS operation allows you to make a call to a specific station w P ush [Digital Button] again to enter the Individual or Talk- 2 (Individual call) or to a particular group (Talkgroup call). Other group ID selection mode. transceivers on the channel will not receive a call that does • The preprogrammed ID name is displayed. 3 not match their individual or talkgroup ID and/or RAN (Radio Access Number) code. • When an ID name is not programmed, the ID code is displayed. • The primarily ID can be preset to display first. 4 This function is usable in transceivers whose revision number is 5 NOTE: When the handshake (repeater access) is failed within the specified time period after pushing [PTT], the transceiver starts roaming. 2.9 or later. Ask your dealer for details. • When you want to send a voice message to all transceivers 6 within the communication range, use the 'All Call' function-- select the Talkgroup ID code "65535". 7 • This function is usable in transceivers whose revision number is 4.3 or later. Ask your dealer for details. e P ush [CH Up] or [CH Down] to select the desired ID name or ID code. 8 D Transmitting a Voice Call q P ush [Digital Button] to enter the application selection • Depending on the presetting, you may be able to directly input 9 the ID. (The optional HM-152T is required.) See page 43 for details. 10 mode. 11 • "VOICE" appears. • To change the call type, hold down [Digital Button] for 1 second in the standby mode. After changing, the transceiver automatically VOICE Individual or Talkgroup S T A T I O N 1 12 enters the application selection mode. ID name is displayed. 13 INDIVIDUAL r H old down [PTT], then speak into the microphone to send 14 a voice message to the selected station or talkgroup. t Release [PTT] to receive. 15 VOICE * This illustration is described with Individual call type. Convenient! (The optional HM-152T is required.) 16 Depending on the presetting, you may be able use the quick ID selection for Voice Call. ➥ While in the standby mode, push the desired digit key ([1] to [9] or [0]) to enter the ID selection mode. • The appropriate ID is displayed. 32
![](/manual_guide/products/icom-icf5061d-operating-guide-1b61e80/35.png)