Icom IC-F5061D Operating Guide - Page 37

IDAS OPERATION 5 D Transmitting a Stun Call 1 A Stun call allows you to send a signal that will stun a targeted station. t P ush [PTT] to transmit the Stun call to the selected station. 2 • "STN TX" is displayed. 3 q P ush [Digital Button] to enter the application selection y Release [PTT]. mode. • "STN ACK" is displayed if an acknowledgement is received from 4 • "VOICE" appears. • To change the call type, hold down [Digital Button] for 1 second in the targeted station. • "STN FAIL" is displayed if no acknowledgement is received from 5 the standby mode. After changing, the transceiver automatically the targeted station. 6 enters the application selection mode. w P ush [CH Up] or [CH Down] to select "STUN." u A fter a specified time period has passed, your transceiver will return to the standby mode. 7 e P ush [Digital Button] again to enter the Individual ID se- 8 lection mode. • A preprogrammed ID name is displayed. 9 • When an ID name is not programmed, an ID code is displayed. • The primarily ID can be preset to display first. 10 This function is usable in transceivers whose revision number is 11 2.9 or later. Ask your dealer for details. r P ush [CH Up] or [CH Down] to select the desired ID name 12 or ID code. • Depending on the presetting, you may be able to directly input 13 the ID. (The optional HM-152T is required.) See page 43 for de- 14 tails. 15 STUN 16 STATION 1 The individual ID name is displayed. 34