Icom IC-F5061D Operating Guide - Page 4

1 PREPARATION ■ Programmable function keys The following functions can be assigned to the [UP], [DOWN], [P0], [P1], [P2], [P3] and [P4] programmable function keys. Consult your Icom dealer or system operator for details concerning your transceivers programming. If the programmable function names are bracketed in the following explanations, the specific key is used to activate the function. D For BIIS 1200 operation only BIIS BUTTON KEY ➥ Push to toggle the call ID list, transmit message and stand- by modes. ➥ Push to toggle between the queue channel and the received message record display, after the queue channel is selected. ➥ Hold down for 1 second to select the queue channel mode. STATUS UP/DOWN KEYS ➥ While in standby, push to display the transmit status screen and select a status number. ➥ When a received SDM (Short Data Message) is displayed, push to cancel the automatic scroll and then manually scroll the message. ➥ W hen an SDM that contains more than 12 characters is displayed, push to manually scroll the message. 1 D For MDC 1200 system operation only MDC CALL KEY ➥ Push to enter the MDC menu selection mode. ➥ Push [CH Up] or [CH Down] to select the desired "SELCALL," "CALALERT," "STUN," "REVIVE," "RADIOCHK," "STATUS", "MSG" and "CALL LOG" MDC menu. After selecting, push this key again to enter the transceiver alias selection mode. • If no operation is performed for approximately 15 seconds, the transceiver returns to the normal operating mode. ➥ In the transceiver alias selection mode, push to return to the MDC menu selection mode. MDC SELCALL KEY Push to enter the transceiver alias selection mode for a SelCall. • After selecting the desired alias, push [PTT] to transmit a SelCall. • If no operation is performed for approximately 15 seconds, the trans- ceiver returns to the normal operating mode. MDC CALLALERT KEY Push to enter the transceiver alias selection mode for a CallAlert. • After the desired alias selection, push [PTT] to transmit a Call Alert. • If no operation is performed for approximately 15 seconds, the transceiver returns to the normal operating mode.