Icom IC-F5061D Operating Guide - Page 48
■ Sending a Status message, ■ Sounding a Horn, ■ Connecting a Printer, ■ Encryption function - ic f5061 service manual
View all Icom IC-F5061D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
5 IDAS OPERATION ■ Sending a Status message Status message can be automatically transmitted. The status message is transmitted when: • The transceiver is turned ON or OFF - Set the status message to be transmitted in 'Power ON Status' or 'Power OFF Status' item, respectively. - Set the target station ID in 'Power Status ID'. • A voice message is sent. - Set the 'Send with Voice Call' item to 'Enable.' - Set the status message to be transmitted in the 'Send Status Number' item. ■ Sounding a Horn An automatic honking function can be used if a horn is connected to the D-Sub 25-pin connector of the transceiver. When a status message is received, the transceiver honks the vehicle's horn for the specified time period to indicate a status message is has been received. This function is convenient when the operator is away from the transceiver. Ask your dealer or system operator, or refer to the IC-F5061/ F6061 series service manual for connection and setting details. ■ Connecting a Printer When a printer is connected to the D-sub 25-pin of the transceiver, the received SDM content and the caller station ID can be printed out. Ask your dealer or system operator for connection details. ■ Encryption function The encryption function enables voice scrambling, which provides private digital communication between stations. q P ush [Scrambler/Encryption] to turn ON the encryption function. • " " appears. w P ush [Scrambler/Encryption] again to turn OFF the encryption function. • " " disappears. 45