Icom IC-M506 Instruction Manual - Page 31
Position and time programming
View all Icom IC-M506 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
DSC OPERATION 7 ■■Position and time programming 1 2 A Distress call should include the ship's position and time. If no GPS is connected, your position and UTC (Universal 3 Time Coordinated) time should be manually input. They are automatically included when a GPS receiver compatible with 4 the NMEA 0183 (ver. 2.0 or later) or NMEA 2000* format is 5 connected. *Some versions of IC-M506 do not have a NMEA 2000 connector. 6 • Manual programming is disabled when a GPS receiver is connected. • Manually programmed position and time will be held for only 23.5 hours. q Enter "POSITION INPUT" in the DSC SETTINGS menu. MENU ➪ DSC SET ➪ Position Input (Push [MENU]) (Select icon) (Rotate dial, then push [ENT].) 7 eeAfter entering the position, push [ENT] to program it. 8 rrThe UTC time programming screen is displayed, enter the 9 UTC time in the following way: • Select a desired number using [Y]/[Z 10 • Push [ENT] or dial to set it. 11 • T o move the cursor, rotate dial or select either arrow, "←" or "→," then push [ENT] or dial. 12 wwEdit your latitude and longitude position using dial, or [Y]/ 13 [Z • Select a desired number using [Y]/[Z 14 • Push [ENT] or dial to set it. • T o move the cursor, rotate dial or select either arrow, "←" or "→," 15 then push [ENT] or dial. • Select N (North latitude) or S (South latitude) when the cursor is 16 on the 'N' or 'S' position. • Select W (West longitude) or E (East longitude) when the cursor is on the 'W' or 'E' position. ttPush [ENT] or dial to program your position and time. • Return to the "DSC SETTINGS" screen. 22