Icom IC-M506 Instruction Manual - Page 74
Received Call log, Receiving a Test Acknowledgement Call, Distress message
View all Icom IC-M506 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
7 DSC OPERATION D Receiving a Test Acknowledgement Call When a Test Acknowledgement Call is received: ➥➥The alarm sounds for 2 minutes. ➥➥"Received ACK" is displayed. The LCD backlight blinks for 2 minutes. q P ush [ALARM OFF] to stop the alarm and the blinking backlight. • Even if you do not push [ALARM OFF], the alarm stops after 2 minutes, and then the screen in step w is displayed. w P ush a softkey to select your desired action. [EXIT] ➥➥ Push to return to the normal operating mode. • T he transceiver exits the DSC mode. • " " continues to blink and the Call is stored in the Received Call Log. ■■Received Call log The transceiver automatically stores up to 50 distress messages and 50 other messages, and they can be used as a supplement to your logbook. • W hile in the normal operating mode, the " " icon blinks in the up- per right corner of the LCD when there is an unread DSC message. DDDistress message qqPush the softkey [LOG] to enter "RCVD CALL LOG" in the DSC CALLS menu, or you can enter it through the Menu screen. MENU ➪ DSC Received Call Log (Push [MENU]) (Select icon) (Rotate dial, then push [ENT].) wwPush [Y]/[Z] to select "Distress," then push [ENT]. • T he Distress messages are stored in "Distress." • The " " icon appears when there are unread DSC messages. • T he " " icon appears when there are no unread DSC messages. • No icon appears when there are no DSC messages. 65