Icom VE-PG3 Instruction Manual - Page 145
Port Settings] continued, Bridge Communication
![]() |
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
5 BRIDGE MODE SETTING SCREEN 8. [Port Settings] (continued) [Port Settings]-[EXT Input 1 (EXT1)/EXT Input 2 (EXT2)] MBridge Communication Set the details of the input audio from the [EXT1]/[EXT2] port. q Encryption Default Callee ID w Default Callee ID e Call Type r Destination Prefix ID �� t Destination ID y My Station Prefix ID ��� u My Station ID Select "Enable" to encrypt the communication. (Default: Disable) • When you select "Enable," enter the appropriate key to [ Encryption Key]. Select "Enable" to apply the ID to the TX signal. (Default: Disable) • When you select "Enable," enter the IDs in the below items. Select the type of call. (Default: Group) • Individual : C all only specified radio. • Group : Call all radios that belong to the specified group. • All : C all all radios. Enter the destination prefix ID. ID range: (Depending on the system mode) Enter the destination ID. ID range: (Depending on the system mode) (Default: 1) Enter the station prefix ID. ID range: (Depending on the system mode) Enter the station ID. ID range: (Depending on the system mode) (Default: 1) 5-82
![](/manual_guide/products/icom-vepg3-instruction-manual-789cf72/145.png)