Icom VE-PG3 Instruction Manual - Page 164
Control Output, Abnormal Condition Monitoring
![]() |
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
5 BRIDGE MODE SETTING SCREEN 9. [Expansion] Menu (continued) MAbnormal Condition Monitoring Set the monitor function for the communication error. [Expansion]-[Abnormal Condition Monitoring] • This is an example. qLAN Port Downlink ��� Select "Enable" to automatically detect the communication error. When the Ethernet cable disconnects from the VE-PG3's [LAN] port, the [WAN] LED blinks Orange, and the error message is displayed on the "SYSLOG" screen in the "Information" menu. (Default: Disable) Control Output Select "Enable" to output the error detect signal from the B1/B2 terminal (+/-). (Default: Disable) • Select "Relay circuit" in the Control Circuit] item on the [EXT Output](1/2), or [EXT I/O](1/2) screen. W hile the error detect signal sends, the VE-PG3 cannot receive signals from the external device that is connected to the B1/B2 terminal (+/-). 5-101
![](/manual_guide/products/icom-vepg3-instruction-manual-789cf72/164.png)