Icom VE-PG3 Instruction Manual - Page 237
RX Volume Offset from Transceiver
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) [Port Settings]-[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)] M Transceiver 1 (TRX1)/Transceiver 2 (TRX2) "General Setting" The setting screen when "General Setting" is selected in [Transceiver Model]. *Appears only when "Enable" is selected in [Serial Communication]. q TX Volume Offset to Transceiver: Adjust the VE-PG3's transmitting audio level that is sent to the connected transceiver between "+15" and "-30" (dB). (Default: -19) w RX Volume Offset from Transceiver: Adjust the VE-PG3's audio input level of the audio signal that is received from the connected transceiver between "+26" to "-26" (dB). (Default: -24) e PTT Type Select the PTT circuit type.(Default: Single PTT) • Single PTT: T he speaker line and PTT input line are separated. • Superimposed PTT: T he PTT input line is superimposed on the MIC line. r PTT Logic Select the PTT logic. (Default: Low) • High: PTT line becomes "High" when it is pushed. (Active High) • Low: P TT line becomes "Low" when it is pushed. (Active Low) 6-58