Icom VE-PG3 Instruction Manual - Page 22

2 BRIDGE MODE APPLICATION 5. Operating in the NXDN Conventional mode (continued) 2. VE-PG3 configuration Access the VE-PG3 setting screen, and set the items as shown below. Menu Item Setting Screen Bridge Bridge Connection Point Connection Setting Item Bridge Connection Point (TRX1) (D-TRX1) (D-TRX2) Item Name Value Port Type Transceiver 1(TRX1) Connection IP Address 192.168.0.2 (VE-PG3's IP address) Connection Port Number 21502 (VE-PG3's unused port) Voice Codec AMBE+2 Port Type Digital Transceiver 1 (D-TRX1) SelCall in Bridge Connection Enable Voice Codec AMBE+2 Port Type Digital Transceiver 2 (D-TRX2) SelCall in Bridge Connection Enable Voice Codec AMBE+2 List of Bridge Connection Point Entries Connection Status During transmit SelCall in Bridge Connection SelCall in Bridge Connection Radio B1 Radio B2 Radio C1 Radio C2 Radio A1 Port Settings Transceiver 1 (TRX1) Transceiver Model Transceiver Model Digital Transceiver 1 (D-TRX1) Transceiver Model Mode: Repeater Address TCP Port Number UDP Port Number Connect Key Unit ID Digital Transceiver 2 (D-TRX2) Transceiver Model Mode: Repeater Address TCP Port Number UDP Port Number Connect Key Unit ID Destination ID 1/192.168.0.2 /21504 Destination ID 2/192.168.0.2 /21504 Destination ID 3/192.168.0.2 /21506 Destination ID 4/192.168.0.2 /21506 Destination ID 8/192.168.0.2 /21500 IC-F5060/F6060 NXDN Conventional UC-FR5000's IP address Connection: Receive port No. (ex. 41200) Data: Receive port No. (ex. 41200) UR-FR5000's key code Unit ID (ex. 10) NXDN Conventional UC-FR5000's IP address Connection: Receive port No. (ex. 41200) Data: Receive port No. (ex. 41220) UC-FR5000's key code Unit ID (ex. 20) 2-12