Icom VE-PG3 Instruction Manual - Page 241
PTT Control Type from the Telephone, Send Connect Failure Tone
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) M Transceiver Control (continued) [Port Settings]-[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)] !0 Send Connect Failure Tone Select "Tone 1" to "Tone 3" to notify that the calling IP phone is unavailable. (Default: Notice Tone 3) !1 Notice Tone Volume ��� Select the tone level for above items. Range: "+6" to "-12" (dB) (Default: 0) PTT Control Type from the Telephone !2 PTT Control Type Select the signal type to be used for TX control. (Default: VOX) • If [VOX] is selected, the communication route is connected when an audio input is detected. 6-62
6
CONVERTER MODE SETTING SCREEN
6-62
9. [Port Settings] Menu (continued)
!0
Send Connect Failure Tone
Select “Tone 1” to “Tone 3” to notify that the calling IP phone is unavailable.
(Default: Notice Tone 3)
!1
Notice Tone Volume ………
Select the tone level for above items.
(Default: 0)
Range: "+6” to “–12” (dB)
PTT Control Type from the Telephone
!2
PTT Control Type …………
Select the signal type to be used for TX control.
(Default: VOX)
• If
[VOX] is selected, the communication route is connected when an audio
input is detected.
M
Transceiver Control (continued)
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]