Icom VE-PG3 Instruction Manual - Page 288
Send and Receive Change Notice to the Telephone, Default: Not used
![]() |
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 288 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) [Port Settings]-[Bridge 1-Bridge 4] MV/RoIP Control Configure the details when a call from an IP phone is received by the bridge-connected device. q Send Connect Success Tone to Telephone Select "Tone 1" to "Tone 3" to notify that the connection to the calling IP phone is succeed. (Default: Notice Tone 1) w Send and Receive Change Notice to the Telephone Select "Tone 1" to "Tone 3" to notify when the TX and RX are changed. (Default: Not used) e Notice Tone Volume ��� Select the tone level for above items. Range: "+6" to "-12" (dB) (Default: 0) 6-109
![](/manual_guide/products/icom-vepg3-instruction-manual-789cf72/288.png)
6
CONVERTER MODE SETTING SCREEN
6-109
9. [Port Settings] Menu (continued)
M
V/RoIP Control
Configure the details when a call from an IP phone is received by the bridge-connected device.
[Port Settings]–[Bridge 1–Bridge 4]
q
Send Connect Success Tone to Telephone
Select “Tone 1” to “Tone 3” to notify that the connection to the calling IP phone
is succeed.
(Default: Notice Tone 1)
w
Send and Receive Change Notice to the Telephone
Select “Tone 1” to “Tone 3” to notify when the TX and RX are changed.
(Default: Not used)
e
Notice Tone Volume ………
Select the tone level for above items.
(Default: 0)
Range: "+6" to "–12" (dB)