Icom VE-PG3 Instruction Manual - Page 239
Transceiver's Beep Invalidity Time, the connected transceiver between +6 to -12 dB.
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) MTransceiver Control Configure the details fro [TRX1]/[TRX2] port. [Port Settings]-[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)] q Priority Receive Mode �� Select "Enable" to keep receiving, even if the transceiver detects audio from the SIP phone. (Default: Disable) w PTT Cancel Mode ��� Select "Enable" to abort the calling to an IP phone when a transmit request is detected, (Default: Disable) eTX Volume Adjust the VE-PG3's transmitting audio level that is sent to the connected transceiver between "+6" and "-12" (dB). (Default: 0) r RX Volume Adjust the VE-PG3's audio input level of the audio signal that is received from the connected transceiver between "+6" to "-12" (dB).(Default: 0) t Transceiver's Beep Invalidity Time Enter the time period to mute the audio (incl. beep sounds) from the connected radio.(Default: 400) Range: "0" to "1000" (in 5 milliseconds step) 6-60