Icom VE-PG3 Instruction Manual - Page 24
Operation, Calling radio A1 from radio B1]
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2 BRIDGE MODE APPLICATION 5. Operating in the NXDN Conventional mode (continued) 4. Operation When pushing [PTT] on radio B1, the communication route is connected to radio A, to communicate with radio A1 or A2. VE-PG3 (192.168.0.2) [USB] [LAN] CT-24 HUB [D-TRX1] [D-TRX2] IP Network Transceiver A [TRX1] Repeater B IC-FR5000 (192.168.0.3) Transceiver A1 Transceiver A2 ID: 8 Port No.: 21500 Destination port No. 21502 Transceiver B1 P0 P1 P2 P3 P4 Port No.: 21504 Transceiver B2 Repeater C IC-FR5000 (192.168.0.4) Port No.: 21506 P0 P1 P2 P3 P4 Transceiver C1 Transceiver C2 ID 1 ID 2 ID 3 ID 4 An example of digital transceiver communication in the Conventional mode • A ll radios communicate with radio A must be set as same as other radios in the area. • In this example, radio A cannot call radios except radio A1 and A2. 【Calling radio A1 from radio B1] qRadio B1's operator: Select the radio A1(A2)'s ID (8), and then hold down [PTT] for 1 second. • The communication route is connected. wRadio A1's operator: Holding down [PTT], speak into the microphone to respond radio B1. eRadio A1's operator: Release [PTT] to return to receive. • In this setting, radio A1 cannot directly call radio B1. radio A1 can call radio B1 after radio B1 called radio A1, using the Talk-back function. 2-14