InSinkErator Invite H990-SS Owners Manual - Page 8
Installing The Faucet - H990
View all InSinkErator Invite H990-SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2 INSTALLING THE FAUCET - H990 A H990 I Unpack dispenser components. I On a firm, flat surface, carefully straighten the copper tubing using hands only. Property Damage: Do not pinch or break copper tubing. Do not distort the last 1 inch of tubing. B Make sure to use rubber gasket to ensure proper seal. H990 I Ensure that the black rubber gasket is properly seated into the base of the dispenser head and will surround the sink mount. I Feed tubes down the hole in the sink or countertop until the base is at rest on the sink or countertop surface. C An assistant may be needed to hold the dispenser head in place while securing the dispenser. H990 I From under the sink, place the semi-circular mounting plate onto the threaded stud. I Place wing nut onto the threaded stud. Make sure faucet head is at the desired angle. Tighten the wing nut until snug, while ensuring the semicircular mounting plate extends beyond the sink hole. 8