Insignia NS-32D120A13 User Manual (English) - Page 14

NS-32D120A13 Insignia 32" 720p LED TV Using DVI (same as HDMI but requires a sound connection) Note You must use the HDMI 1/DVI jack to connect a cable or satellite box using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers. To connect a cable or satellite box using DVI: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the cable or satellite box. 4 Connect the other end of the cable to the HDMI 1/DVI jack on the back of your TV. Using component video (better) To connect a cable or satellite box using component video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a component video cable (not provided) to the COMPONENT IN Y, PB, and PR video jacks on the back of your TV and the component video out jacks on the cable or satellite box. Cables are often color-coded to match color-coded jacks. Back of TV Audio cable Back of TV HDMI cable with HDMI-DVI adapter 3.5mm audio cable Cable or satellite box 5 Connect a 3.5mm audio cable (not provided) to the AUDIO jack on the back of your TV and to the AUDIO OUT jacks on the cable or satellite box. Note When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog. 6 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 7 Go through the Setup Wizard on page 19. Cable or satellite box Component video cable 4 Connect an audio cable (not provided) to the L/R AUDIO jacks on the back of your TV and to the audio out jacks on the cable or satellite TV box. Note • • The L/R AUDIO jacks provide the audio connection for a component video device connected to the COMPONENT IN Y, PB, and PR video jacks or for a composite video device connected to the AV IN VIDEO jack. When you connect the audio using the L/R AUDIO jacks, the audio output is analog. 5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 6 Go through the Setup Wizard on page 19. 10 www.insigniaproducts.com