Insignia NS-32D120A13 User Manual (English) - Page 15

Insignia 32" 720p LED TV Using composite video (good) To connect a cable or satellite box using composite video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to the AV IN VIDEO jack and L/R AUDIO jacks on the back of your TV and to the composite video and audio out jacks on the cable or satellite box. Note • • The L/R AUDIO jacks provide the audio connection for a component video device connected to the COMPONENT IN Y, PB, and PR video jacks or for a composite video device connected to the AV IN VIDEO jack. When you connect the audio using the L/R AUDIO jacks, the audio output is analog. Cables are often color-coded to match color-coded jacks. Using coaxial (good) To connect a cable or satellite box using coaxial: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the TV IN ANT/CABLE jack on the side of your TV and to the coaxial out jack on the cable or satellite box. Cable or satellite box Coaxial cable Back of TV Cable or satellite box AV cable 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 19. Side of TV 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 19. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. www.insigniaproducts.com 11