Insignia NS-32D120A13 User Manual (English) - Page 54
Specifications - tuner
View all Insignia NS-32D120A13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
NS-32D120A13 Insignia 32" 720p LED TV Problem Solution After Auto Channel Search, there are no channels. One or more channels do not display. Password is lost. Some settings cannot be accessed. TV cabinet creaks. Control buttons do not work. TV keeps turning off. • Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. • Make sure that the antenna or cable/satellite TV is connected securely to your TV. • Try replacing the cable between the antenna/cable or cable/satellite box and your TV. • Make sure that the channels are not blocked. See "Setting parental control levels" on page 35. • Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See "Hiding channels" on page 30. • If you are using a cable or satellite box, use the remote that came with that box to change channels. • Make sure that you have the correct input selected to view channels from the cable or satellite box. • If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see "Checking the digital signal strength" on page 32. • Enter 9999 to access parental controls, then set a new password. See "Setting or changing the password" on page 33. • If a setting is grayed, the setting is not available in the current video input mode. • When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction. • Make sure that the Button Lock option is set to Off. See "Locking control buttons" on page 34. • Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV. • Make sure that the sleep timer is not turned on. See "Setting the sleep timer" on page 41. Note: If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. Specifications Specifications are subject to change without notice. Dimensions and weight Without stand With stand 29.16 × 19.06 × 3.87 in. (74.08 × 48.42 × 9.84 cm) 11.85 lbs. (5.37 kg) 29.16 × 20.73 × 7.25 in. (74.08 × 52.66 × 18.41 cm) 13.04 lbs. (5.91 kg) Screen Screen size measured diagonally Display type Panel 60 Hz vs.120 Hz Display resolution Panel resolution Aspect ratio Contrast ratio (typical)-panel Dynamic contrast ratio- list value Brightness (center typical) cd/m2 Comb filter Response time Horizontal viewing angle Vertical viewing angle Display resolutions HDMI Component video Tuner Analog Digital Inputs HDMI/DVI Component video Composite video Shared audio (component and composite) S-Video PC/VGA 3.5mm PC audio input USB Coaxial cable Outputs Video Analog audio/headphone Digital audio WiFi Ethernet Audio Speakers Power Power consumption Power input 31.5 in. LED 60Hz 720p 1366 (H) × 768 (V) 16:9 3000:1 100,000:1 300 nits 3d y/c digital 6.5 ms 178° 178° 720p, 480p, 480i 720p, 480p, 480i NTSC ATSC, 8-VSB, Clear-QAM 1 (side)/1 (back) E-EDID compliant HDCP compliant 1 (back) 1 (back) Yes No 1 (back) 1 (back) 1 (side) Supports JPEG and firmware upgrade 1 (side) No 1 (side) 1 optical (back) No No Number: 2 Watts per channel: 5W On: 75W Standby: