Insignia NS-32E740A12 User Manual (English) - Page 17

Insignia 32" LED-LCD HDTV, 720p Connecting an antenna or cable TV (no box) To connect an antenna or cable TV (no box): 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect a coaxial cable to the ANT/CABLE jack on the back of your TV and to the antenna or cable TV wall jack. Connecting a DVD or Blu-ray player Using HDMI (best) To connect a DVD or Blu-ray player using HDMI: 1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI cable (not included) to an HDMI jack on the back or side of your TV and to the HDMI OUT jack on the DVD or Blu-ray player. DVD or Blu-ray player Back of TV Coaxial cable 3 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 4 Go through the setup wizard on page 21. Notes • • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. If the antenna is not installed correctly, contact qualified service personnel to correct the problem. Back of TV 3 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the DVD or Blu-ray player. 4 Press INPUT to open the Input Source list. 5 Press or to highlight HDMI 1, HDMI 2, or HDMI 3, then press ENTER. Note You can also press HDMI repeatedly to select the DVD or Blu-ray player. www.insigniaproducts.com 13