Insignia NS-37LCD User Manual (English) - Page 18

18

Insignia NS-37LCD 37” LCD TV

www.insignia-products.com

Programming the remote control

Programming a device connected to your TV

The remote control can control four devices,

such as a VCR, DVD player, cable or satellite

receiver, amplifier or tuner, or similar device.

To program the remote control:

1

Find the code for the device you want to

program. See “Appendix” on page 20 for a list

of codes. If there is more than one code listed

for a device, write down all of the codes.

2

Turn on the device you want to program, and

load media if required (for example, a DVD).

3

Press a device key on the remote control (for

example,

DVD

,

CBL

, or

AUX)

.

4

Press and hold the

SET

button on the remote

control until the LED blinks twice, then

release the button.

5

Enter the first five-digit code for your device.

The LED blinks once as each digit is entered.

If the code is correct, the LED blinks twice.

6

Aim the remote at the device, then press the

button. The device should turn off.

7

Repeat Steps 1 through 6 to program

additional devices.

8

Press the

SET

button to save the code and

exit.

Searching for a code

To search for a code:

1

Press a device key.

2

Press and hold the

SET

button until the LED

blinks twice, the release the button.

3

Enter

991

, then the device group number

(0=cable, 1=TV, 2=VCR, 3=audio). The LED

blinks twice.

4

Aim the remote control at the device, then

press the

button. If the device responds,

go to Step 7.

5

If the device does not respond, press the

CH+

button. Your remote control will try the

next code. Keep pressing the

CH+

button

until the device responds. You can press the

CH–

button to try a previous code.

6

To search for a code for another device,

repeat Steps 1 through 5.

7

Press the

SET

button to save

the code and

exit.

Checking the code

If you programmed a device by searching for a

code, you may want to know what four-digit code

the remote is using.

To check the code:

1

Press the device button on the remote

control.

2

Press and hold the

SET

button until the LED

blinks twice, then release the button.

3

Enter

990

. The LED blinks twice.

4

Press

1

and count the LED blinks. This is the

first digit of the code (for example, if the LED

blinks twice, the first digit is 2. If the LED

does not blink, the first digit is 0).

5

Repeat Step 4 using

2

for the second digit,

3

for the third digit,

4

for the fourth digit, and

5

for the fifth digit.

6

Press the

SET

button to exit.

Setup

Tuning Band

–Selects the TV signal source. For

more information, see “Selecting the TV

source” on page 12.

DTV Signal

–Displays the digital TV signal

strength. For more information, see “Checking

the DTV signal strength” on page 14.

Auto Ch Search

–Automatically sets up a list of

the channels available in your area. For more

information, see “Automatically setting up

channels” on page 13.

Manual Ch Set

–Lets you add or delete

channels from the channel list. For more

information, see “Manually adding or deleting

channels from the channel list” on page 13.

Channel Labels

–Lets you add a label to a

channel. For more information, see “Adding a

channel label” on page 14.

Feature

Source

–Selects the video source. You can

select:

•

TV

•

Composite1

•

Composite2

•

Component1

•

Component2

•

VGA

•

HDMI

•

S-Video

You can also press the

INPUT

button to select

the video source.

Time Set

–Sets the clock. For more

information, see “Setting the clock” on

page 14.

Sleep Timer

–Sets the sleep timer. For more

information, see “Setting the sleep timer” on

page 15.

Parental Control

–Accesses V-chip controls.

For more information, see “Setting parental

controls” on page 15.

Closed Caption Options

–Customizes closed

captions for digital broadcasting systems. You

can adjust Size, Font, Text Color, Text Opacity,

Background Color, Background Opacity, Edge

Effect, and Edge Color.

CC when Mute

–Automatically displays closed

captions when the volume is muted.

Menu Language

–Selects the language for the

on-screen menu. You can select English,

French, or Spanish.

On-screen

menu

Options

Note

If the LED does not blink twice, repeat Steps 3

through 5 using a different code.

Note

If the device does not turn off, repeat Steps 4

through 6 using a different code. If you cannot find

a code that works, see “Searching for a code” on

page 18.

Note

For future reference, write down each working

code.

Insignia NS-37LCD User Manual (English) - Page 18

Programming the remote control

Page 18 highlights