Insignia NS-42E470A13 User Manual (English) - Page 57

Insignia 42" 1080p LED TV Problem Solution After Auto Channel Search, there are no channels. One or more channels do not display. Password is lost. Some settings cannot be accessed. TV cabinet creaks. Control buttons do not work. TV keeps turning off. • Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. • Make sure the antenna or cable/satellite TV is connected securely to your TV. • Try replacing the cable between the antenna/cable or cable/satellite box and your TV. • Make sure that the channels are not blocked. See "Setting parental control levels" on page 38. • Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See "Hiding channels" on page 33. • If you are using a cable or satellite box, use the remote that came with that box to change channels. • Make sure that you have the correct input selected to view channels from the cable or satellite box. • If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see "Checking the digital signal strength" on page 35. • Enter 9999 to access parental controls, then set a new password. See "Setting or changing the password" on page 35. • If a setting is grayed, the setting is not available in the current video input mode. • When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction. • Make sure that the Button Lock option is set to Off. See "Locking control buttons" on page 36. • Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV. • Make sure that the sleep timer is not turned on. See "Setting the sleep timer" on page 43. Note: If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. Specifications Specifications are subject to change without notice. Dimensions and weight Without stand With stand 38.5 × 24.28 × 1.38 in. (97.8 × 61.7 × 3.5 cm) 28.2 lbs. (12.8 kg) 38.5 × 26.2 × 9.25 in. (97.8 × 66.5 × 23.5 cm) 30.9 lbs. (14 kg) Screen Screen size measured diagonally Display type Panel 60 Hz vs.120 Hz Display resolution Panel resolution Aspect ratio Contrast ratio (typical)-panel Dynamic contrast ratio- list value Brightness (center typical) cd/m2 42 in. LED 120Hz 1080p 1920 (H) × 1080 (V) 16:9 3000:1 70000:1 350 nits Comb filter Response time Horizontal viewing angle Vertical viewing angle 3d y/c digital 6.5 ms 178 178 Display resolutions HDMI Component video Tuner 1080p, 1080i, 720p, 480p, 480i 1080i, 720p, 480p, 480i Analog Digital Inputs HDMI Component video Composite video Shared audio (component and composite) S-Video PC/VGA 3.5mm PC audio input DVI USB Outputs Video Analog audio/headphone Digital audio WiFi Ethernet Audio NTSC ATSC, 8-VSB, Clear-QAM 3 (side) E-EDID compliant HDCP compliant 1 (back) 1 (back) Yes No 1 (back) 1 (side) 1 (side) (HDMI 1/DVI jack) 1 (side) Support JPEG and firmware upgrade No 1 (side) 1 optical (back) No No Speakers Power Number: 2 Watts per channel: 10W Power consumption Power input Miscellaneous On: 80W Standby: