Intel Q9300 Data Sheet - Page 103
Debug Tools Specifications
UPC - 675900938236
View all Intel Q9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Debug Tools Specifications 8 Debug Tools Specifications 8.1 8.1.1 8.1.2 Logic Analyzer Interface (LAI) Intel is working with two logic analyzer vendors to provide logic analyzer interfaces (LAIs) for use in debugging Intel® Core™2 Extreme processor QX9000 series, Intel® Core™2 Quad processor Q9000, Q9000S, Q8000, and Q8000S series systems. Tektronix and Agilent should be contacted to get specific information about their logic analyzer interfaces. The following information is general in nature. Specific information must be obtained from the logic analyzer vendor. Due to the complexity of processor systems, the LAI is critical in providing the ability to probe and capture FSB signals. There are two sets of considerations to keep in mind when designing a processor system that can make use of an LAI: mechanical and electrical. Mechanical Considerations The LAI is installed between the processor socket and the processor. The LAI lands plug into the processor socket, while the processor lands plug into a socket on the LAI. Cabling that is part of the LAI egresses the system to allow an electrical connection between the processor and a logic analyzer. The maximum volume occupied by the LAI, known as the keepout volume, as well as the cable egress restrictions, should be obtained from the logic analyzer vendor. System designers must make sure that the keepout volume remains unobstructed inside the system. Note that it is possible that the keepout volume reserved for the LAI may differ from the space normally occupied by the processors heatsink. If this is the case, the logic analyzer vendor will provide a cooling solution as part of the LAI. Electrical Considerations The LAI will also affect the electrical performance of the FSB; therefore, it is critical to obtain electrical load models from each of the logic analyzers to be able to run system level simulations to prove that their tool will work in the system. Contact the logic analyzer vendor for electrical specifications and load models for the LAI solution it provides. § Datasheet 105