Intel SR1520MLNA User Guide - Page 27
Peripheral Devices
![]() |
UPC - 735858197434
View all Intel SR1520MLNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Peripheral Devices The server system provides locations for installing up to two fixed 2.5-inch SATA hard drives and up to two Intel® Z-U130 Value Solid State Drive (Intel® VSSD). Each server board controls one of each of these drives. No optical or floppy drive bays are available, but these devices are supported through an external USB connection. The drives must be purchased separately. The following figure shows the available options. B A AF002494 . A. Two 2.5-inch hard drive bays, stacked on top of each other B. Two Intel® Z-U130 Value Solid State Drive bays Figure 4. Optional Peripherals For instructions on installing a hard drive, see "Installing and Removing a Hard Drive" on page 15. For instructions on installing the Intel® Z-U130 Value Solid State Drive, see the document titled Intel® Z-U130 Value Solid State Drive Mounting Kit Installation Guide for Intel® Server Systems. Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a maximum ambient temperature of 45oC. Note: The Intel® Server System SR1520ML does not support all Serial ATA (SATA) hard drives. See "Server System References" on page xix for an Internet link to a list of supported hardware. Intel® Server System SR1520ML User's Guide 7
![](/manual_guide/products/intel-sr1520ml-user-guide-634c1a7/27.png)