Intel SR1520MLNA User Guide - Page 56

Installing the Heat Sink

Get Intel SR1520MLNA - Sy 1U 600W Dual X38Ml Mb 2.5Sata Hdd Ddr2 2Pci-E X16 Risers PDF manuals and user guides
UPC - 735858197434
View all Intel SR1520MLNA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

AF000101 Figure 28. Installing the Processor Note: Make sure the alignment triangle mark and the alignment triangle cutout align correctly. 3. Lower the CPU load plate. 4. Lower the socket lever. 5. Install the heat sink. For instructions, see the following steps. Installing the Heat Sink Install the processor before installing the heat sink. For instructions, see "Installing the Processor" on page 35. Caution: The heat sink has Thermal Interface Material (TIM) located on the bottom of it. Use caution when you unpack the heat sink so you do not damage the TIM. 1. Remove the protective cover from the TIM on the underside of the heat sink. Do not touch the TIM. 2. Orient the heat sink over the processor as shown by Figure 29. The fins must be positioned as shown by letter "A" to provide correct airflow through the system. 3. Set the heat sink over the processor, lining up the four captive screws with the four posts surrounding the processor as shown by letter "B". 4. Loosely screw in the captive screws on the heat sink corners in a diagonal manner as shown by the four circled numbers in the figure below. Do no fully tighten one screw before tightening another. 36 Intel® Server System SR1520ML User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
36
Intel
®
Server System SR1520ML User’s Guide
Figure 28. Installing the Processor
Note:
Make sure the alignment triangle mark and the alignment triangle cutout align correctly.
3.
Lower the CPU load plate.
4.
Lower the socket lever.
5.
Install the heat sink. For instructions, see the following steps.
Installing the Heat Sink
Install the processor before installing the heat sink. For instructions, see
“Installing the
Processor” on page 35
.
Caution:
The heat sink has Thermal Interface Material (TIM) located on the bottom of it. Use
caution when you unpack the heat sink so you do not damage the TIM.
1.
Remove the protective cover from the TIM on the underside of the heat sink. Do
not touch the TIM.
2.
Orient the heat sink over the processor as shown by
Figure 29
. The fins must be
positioned as shown by letter “A” to provide correct airflow through the system.
3.
Set the heat sink over the processor, lining up the four captive screws with the four
posts surrounding the processor as shown by letter “B”.
4.
Loosely screw in the captive screws on the heat sink corners in a diagonal manner
as shown by the four circled numbers in the figure below. Do no fully tighten one
screw before tightening another.
AF000101