Intel SR1520MLNA User Guide - Page 69

SATA_0 letter B

Get Intel SR1520MLNA - Sy 1U 600W Dual X38Ml Mb 2.5Sata Hdd Ddr2 2Pci-E X16 Risers PDF manuals and user guides
UPC - 735858197434
View all Intel SR1520MLNA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

9. Install the system memory. For instructions, see "Installing DIMMs" on page 30. Notes: • Use caution when connecting cables to make sure you do not pinch any cables. • For data cable routing information, see "Cable Routing" on page 71. • For power cable routing information, see "Cable Routing" on page 71. 10. Connect the cables at the front of the server board. - Main power. The cable end is labeled P1 for the server board at the right and P2 for the server board at the left. Several cables lay underneath this connector. Be sure the cables do not get pinched in the connector. See letter "A" in the following figure. - Front panel (letter "E") - Sys_fan_3 (letter "D") 11. Connect the cables at the rear of the server board. - USB_2_3 (letter "C") - SATA_0 (letter "B") Intel® Server System SR1520ML User's Guide 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
Intel
®
Server System SR1520ML User’s Guide
49
9.
Install the system memory. For instructions, see
“Installing DIMMs” on page 30
.
Notes:
•
Use caution when connecting cables to make sure you do not pinch any cables.
•
For data cable routing information, see
“Cable Routing” on page 71
.
•
For power cable routing information, see
“Cable Routing” on page 71
.
10.
Connect the cables at the front of the server board.
—
Main power. The cable end is labeled P1 for the server board at the right and P2
for the server board at the left. Several cables lay underneath this connector. Be
sure the cables do not get pinched in the connector. See letter “A” in the
following figure.
—
Front panel (letter “E”)
—
Sys_fan_3 (letter “D”)
11.
Connect the cables at the rear of the server board.
—
USB_2_3 (letter “C”)
—
SATA_0 (letter “B”)