Intel SR1520MLNA User Guide - Page 68
Installing the Server Board
![]() |
UPC - 735858197434
View all Intel SR1520MLNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Installing the Server Board 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 14. 4. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 28. 5. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 21. 6. Place the server board into the server system as shown by letter "A" in the figure below. 7. Attach the server board with six screws. See letter "B" and the arrows indicating the screw locations in the figure. B A Figure 39. Installing the Server Board AF002521 8. Install the processor and the heat sink. For instructions, see "Installing the Processor" on page 35. 48 Intel® Server System SR1520ML User's Guide
![](/manual_guide/products/intel-sr1520ml-user-guide-634c1a7/68.png)